专业煮面炉 / 汤炉维修 · 安装 · 调试 · 24/7 服务 Professional Noodle Cooker / Stock Pot Range Service · Repair · Installation · 24/7 Support
餐厅、火锅店、拉面馆、外卖厨房——快速排障、保障热效率与安全使用。 Restaurants, noodle shops, hot pot kitchens—fast troubleshooting to maintain performance and safety.
常见问题
Common Issues
- 点火不良 / 无法启动
- Ignition failure / won't start
- 热效率下降 / 加热慢
- Reduced heat efficiency / slow heating
- 燃气喷嘴堵塞
- Clogged gas orifices
- 火焰异常（黄火/回火）
- Abnormal flame (yellow / flashback)
- 进风量不足或排气不畅
- Insufficient air intake / poor exhaust
可能原因
Possible Causes
- 燃气阀、喷嘴或点火针积碳堵塞
- Carbon buildup in valves, orifices, ignitors
- 电磁阀损坏 / 压力不稳
- Faulty solenoid / unstable gas pressure
- 进风口灰尘堵塞导致燃烧不完全
- Air intake blocked causing poor combustion
- 热交换器结垢或火孔变形
- Heat exchanger scaling or warped ports
立即自检
Quick Self-Check
- 确认燃气开关与调压正常
- Check gas valve and regulator
- 清理喷嘴与进风口灰尘
- Clean gas jets and air intake
- 确认排烟畅通、火焰呈蓝色
- Ensure clear exhaust, steady blue flame
我们提供What We Do
诊断与维修
Diagnostics & Repair
- 燃气系统检测与调试
- Gas system testing & tuning
- 点火器 / 电磁阀 / 控制板更换
- Ignitors, solenoids, control boards
- 喷嘴清洗与火焰校正
- Jet cleaning & flame adjustment
安装与改造
Install & Retrofits
- 新厨房设备安装 / 接气调试
- New unit installation & gas setup
- 多炉并联 / 节能升级改造
- Multi-range retrofits & energy upgrades
- 排气通风系统优化
- Exhaust and ventilation optimization
维护与保养
Maintenance
- 燃烧器与喷嘴定期清洗
- Routine burner & jet cleaning
- 气密性测试与压力检测
- Leak testing & pressure check
- 火焰与热效率校准
- Flame and efficiency calibration
紧急服务
Emergency Service
- 7×24 小时上门维修
- 24/7 on-site service
- 优先处理燃气泄漏与安全隐患
- Priority for gas leaks & safety hazards
常见品牌Brands We Service
Atosa、American Range、Vulcan、Garland、Southbend、Imperial、CookRite、TurboChef 等 Atosa, American Range, Vulcan, Garland, Southbend, Imperial, CookRite, TurboChef, etc.
多年经验
Years of Experience
熟悉各类餐饮炉具系统，快速定位点火不良、热效率下降等故障。
Experienced with all range types—quick to fix ignition or efficiency issues.
持证合规
Licensed & Insured
严格遵守燃气安全及通风规范，施工安全可靠。
Fully code-compliant gas and ventilation work—safe and professional.
透明价格
Upfront Pricing
上门检测后报价，价格合理，无隐藏费用。
Transparent diagnostics-based pricing—no hidden fees.
FAQ
点火不良怎么办？Ignition failure—what to do?
先确认燃气阀是否打开，喷嘴及点火针是否清洁；若仍无法启动，请联系我们进行专业检修。
Check gas valve, clean nozzle and ignitor; if it still won’t light, call for service.
热效率下降的原因？Why is the heating slow?
热交换器积碳或火孔堵塞常导致加热变慢，应定期清理并检测燃气压力。
Carbon buildup or clogged ports cause slow heating; clean and check gas pressure regularly.
燃气喷嘴堵塞怎么办？Gas jet clogged—how to fix?
关闭燃气后清洁喷嘴或更换喷头，避免使用金属针刮除造成孔径变化。
Turn off gas, clean or replace jets; avoid damaging orifice size with metal tools.
联系方式Contact
Phone: +1 929-708-8979
Email: chunfenghvac@gmail.com
Website: www.chunfenghvac.com
地址：Address: 131-60 45 Ave, Flushing, NY 11350